A flag is a great representation to an organization or a home. It represents whom they are and should be flown with pride. Likewise, it should be installed properly. This way it meets all its mandates as a flag.
There are loads of things that go into installing and maintaining a flagpole be it for hospitals, schools, private homes, car yards, fast food stores, parks, government buildings, and even memorials. Whatever flagpole you want, it should be perfect for a good representation.
Besides, it should receive maintenance every now and then, so keep that in mind when installing one or hiring for an installation.
As much, as you can install it with some DIY guides, you can also seek professional help from reputable flagpole servicing companies within your surrounding area. For instance, if you are in Melbourne, Australia you can check some flagpole repairs and maintenance in Melbourne, VIC and see what they have to offer before settling on any of them.
Nonetheless, even if you hire or install the flagpole yourself there are some things you should know first. Otherwise, you are better off without one. Here they are.
1. Flagpole Location
You should always choose a great location for your flagpole, away from any ground or above ground obstacles. You should never locate your flagpole where it can come in direct contact with electrical lines, lawn mowers, vehicles, or any other objects that are prone to ramming against stuff.
In relation, you should check with your utility companies or municipal authorities before you start your installation. This way you do not damage any buried lines or pipes within your area.
2. Flagpole Storage
You should never leave your flagpole lying around on the ground after it has been delivered. Store it somewhere safe and in an upright position, not flat on the ground. If you do not plan to erect it ASAP then leave it in its protective wrapping until you do so. Also, ensure you store it in a dry place. This way it stays dry until its installation day.
In relation, during installation do not remove the plastic wrapping around the flagpole. Just keep it on for added protection as you install it.
3. Flagpole Hole Size
The hole size for your flagpole should not be small. Rather it should be four times larger than the poles diameter. Likewise, it should be so deep. This way the flagpole ground sleeve is flush with the surface.
Always use crushed rock as fill around the sleeve, no dirt or sand.
4. Windy Weather
During your flagpole installation, check the weather and ensure it is not windy. Windy situations always make the installation process very difficult. So be on the know howto avoid wasting your precious time on suchweather.
5. Avoid Ready-Mix Cement
When installing a flagpole, never use ready-made cement but regular cement that dries naturally. You should not also position its sleeve without ensuring that the filled-in concrete is leveled properly. In relation, you should not put too much cement in the hole, this way you avoid overflowing.
6. Flagpole Extension Slip-Ups
Larger flagpoles such as those around 40-foot need an extension piece you insert on the end and place into the ground sleeve. You should never allow the extension to show above ground and do not force it into the ground. You can cut it to make it fit properly.
Moreover, do not place the pole in the extension without some shims, most likely wood shims, to ensure it stands evenly. Strips of cedar shingles often work best for this task.
7. Flash Collar Installation
Do not set the flagpole into the ground hole without first slipping the flash collar around it. This is because you will not be able to place it on the top and bring it down, after installation. So remember to do it before placing the pole in the ground, it is important and will save you a lot ofagonies.
In conclusion, do you want to install a flagpole? Take note of these things. You can research more. It is better to have more knowledge about it, even if you will hire a professional to do it. This way you make sure, you get what you pay for every step of the way.