If you think your roof is in good shape just because the shingles don’t look worn out or damaged, you need to think again. The surface of the roof may have a lot of issues that you may not spot at a quick glance. Therefore, you may want to have a professional inspect your roof. In this article, we have given 8 checklist points that describe the importance of professional roof inspection. This list will help you make sure you don’t miss anything that may require repair or replacement. Without further ado, let’s go through the checklist points.
Consider the roof type
Today, you can find different types of roofs. In other words, they are made of different types of materials, and each type comes with its own specific precautions and maintenance recommendations. Therefore, we suggest that you consider the type of roof you have before you perform the inspection.
Prepare the roof for proper Inspection
Cleaning a roof before inspection is recommended. So, what you need to do is clear any dirt, debris, fallen leaves, broken branches, lichens, moss, etc. Apart from this, you may want to check for sanding water that may have formed a type of small pond on the roof.
If you don’t remove the pounding water, it may cause severe damage to your roof. Therefore, it makes sense to get it removed as soon as possible.
Check the flashing
During inspection, you may want to check for any tears or cracks, especially in the flashing. Basically, flashing refers to a thin layer of water-resistant material. As the name suggests, this material protects against water incursion and damage.
Common types of this material include PVC, galvanized steel and aluminum. Usually, flashing is installed on the roofs that face uphill to cover the seams. The idea is to make the ice or snow flow over the seam.
Check the entire surface from top to bottom
An experienced roof inspection will check the defense system of your roof against the elements. This includes the cedar shakes, clay tile, metal, outer roof covering and other parts.
If there are torn, cracked, damaged or worn shingles, you should have them replaced right away. You should check the shingles for blistering, curling or buckling for signs of wear and tear.
Also, you should check for any loose or protruding nail heads. If you notice asphalt shingle granules, know that you have worn shingles on your roof.
Check the attic and ceiling
If the inside ceilings of your roof have wet spots, cracks or other types of damage, know that these are signs of roof leakage. The layers beneath the roof surface are susceptible to roof damage. Therefore, this type of roof damage may eat away at a building without the knowledge of the owner and something that shouldn’t be taken for granted.
Check the underlayment
The deck of your roof rests on the beams and provides support for your roofing layers. Also, underlayment is a type of layer of felt or fiberglass paper that covers the decking. Here you should check the underlayment to ensure there is a moisture-proof membrane in the middle of the two layers.
Check the gutter condition
The gutters and the surrounding parts should also be inspected. Usually, stray water causes a lot of problems. You need to make sure that the gutters don’t leak, overflow, back up or clog or you may have to experience serious roof damage.
Apart from this, you need to inspect the soffits and fascia boards that keep the gutters in place since the material of these parts are prone to degradation and corrosion.
Don’t Forget the Downspouts
Downspouts refer to an important component of the gutter system. Don’t forget to make tiny repairs to downspouts as they are prone to cracking and corrosion as time goes by. Their role is to make sure that the gutters take the water to the ground away from your home. You may find it harder to spot any debris in the downspouts. Therefore, you should get your gutters cleaned on a regular basis.
So, these are 8 checklist points that you should watch out for if you are going to have your roof inspected. If you are going to call professional roofing companies like AAA Roofmasters, keep these points in mind to help you ensure they can get the job the right way and that they don’t miss any area of your roof that needs work. Hope this helps!