Some things are necessities while some are luxuries as far as construction is concerned. The necessities are features that must be put in place before the place can be used or said to be completed.
One of these necessities is plumbing work. Regardless of the size, location, or kind of building, it is only ideal that it has a fully functional toilet, sewage, and other plumbing features. This is the reason why plumbing systems are important and cannot be taken for granted.
You need to identify the right plumbing professional or company and have them carry out checks and repairs when the need arises. However, there are times you can handle the situation on your own. This is possible if you understand a few tips and tricks as advised by professionals.
We will discuss DIY approaches to resolving 2 common plumbing problems in this article. We advise that you keep reading as the information will come in handy at some point.
2 Common Plumbing Problems and How to Resolve Them
Two of the common plumbing problems and how to fix them are explained below:
Fixing a Blocked or Clogged Sink
Frankly, we do not advise that you have your plumber come over every time you have a problem. This is because you can handle some things on your own. One of the things you can sort out is a clogged or blocked sink.
This is except the situation has gotten out of hand. However, you should still try all that you can before putting a call through to the plumber.
You need 3 things to put an end to blockage or clogging of your sink. The needed things are hot water, baking soda, and vinegar. You would need lots of hot water so you should make sure you have enough.
Try to deal with the stuck water before you start the unclogging process. You can do this by using something suitable to remove the water or liquid content in the sink. This is important so that you have easy access to the drain.
You could also allow the water to slowly go through if the blockage is not absolute. This is because some blockages to the sink are not so severe. In fact, using a plunger might resolve such in no time. However, you should do the following if this is not the case.
Kick start the entire unclogging process by pouring the hot water into the sink’s drain. The essence is to force some of the things that are causing the blockage to make way. However, this alone will not do the trick. So, you should do the next thing.
Pour one full cup of baking soda into the drain. You would then need to give the process some time before carrying out the next step. We suggest that you wait for about 6 to 8 minutes for the baking soda to take effect.
The next thing is to add vinegar. You should begin to notice some intense chemical reaction moments after the vinegar is applied. This chemical reaction is a result of the combination of baking soda and vinegar.
This will be helpful because the foam produced will wash away greasy solutions and some other things. Allow the reaction to take effect for about 5 minutes before adding another cup of baking soda.
You should also wait for about 4 – 5 minutes before ending the process by pouring hot water. It is strongly recommended that the last hot water is poured with a bit of force.
However, you need to do this with caution. This is so that you do not have the hot content hurt you. For more information, you can read this.
Fixing a blocked or Clogged Toilet
The truth is that fixing a blocked or clogged toilet is not a pleasant experience. This is especially because of the stink and unpleasant nature of unclogging this plumbing installation. For this reason, we suggest that you avoid having such an occurrence.
You need to pay attention to what you let into your toilet. Make sure whatever goes down the drain will not complicate things at any point in time. For instance, items like sanitary pads are not supposed to be let into the toilet drain.
This is because they will start by absorbing moisture inside the drain and expand in the process. The thickness of the pad will also affect its ability to allow water through. So, you should not dispose of sanitary pads through the toilet.
Also, make sure you flush the toilet every time you make use of toilet paper. This is because an accumulation of this item can clog the toilet.
Just make sure whatever you let into the toilet drain is right. Now that you are aware of how to disallow items that can cause clogging of the toilet, let us discuss how to fix the situation.
You can make use of the plunger to do this. However, you should know that there are different kinds of plungers and they offer different degrees of solution. So, you should find out the best option and make use of it.
We strongly suggest that you make use of a toilet auger even though they cost a lot more than plungers. You are more likely going to get the desired results if you use this tool. We also advise that the option you use is no less than 6 feet. This will allow you to reach well into the drain.
Another way to fix a clogged or blocked toilet is to make use of liquid detergent and hot water. To do this, we strongly recommend removing some of the water in the toilet. This is to avoid the water splashing.
Start by generously pouring the liquid detergent into the toilet. You should give it some time before pouring the hot water. You will notice that the blockage would begin to clear up. Pour another bowl of hot water after a while.
On a Final Note
These DIY approaches to the 2 common plumbing problems discussed here might not work in some situations. This may be because the situation is a lot more severe or something else is wrong. In that case, you would need to call your plumber to handle things. You can visit heroplumbing.com.au for more on this subject.
We do hope that you have learned how to fix a clogged toilet and sink in this article and can put the lessons learned to practice when the need arises.