Owning a residence all for themselves is still a dream for many. Even more tedious job is to maintain your esteemed belonging, lifelong. The most common problem that may arise in your residence would be wall dampness. Referred to as a wet wall, this excessive moisture in your wall would lead to the growth of microbes, detrimental health conditions on occupants, and eventually degrades the life of your wall.
Common Signs Of Damped Wall
- Wall stains
- Peeled off the paint on your wall
- Visible water condensation
- Salt petering on walls
- Algal and fungal colonies grouped on damped spot
- An unpleasant musky smell lurking inside the house
Methods To Expunge Wall Dampness
If you are hunting for a good moisture fighter in the local market, Vochtbestrijding snel will stand tall with a more exceptional reputation. They offer all sorts of methods to keep your walls safe from dampness.
- Damp proofing material
This process involves injecting a moisture-resistant mix injected through small holes drilled on the exterior of the walls. This mix intrudes the bricklayer and cures after forming a firm bond between bricks. It is a very cost-effective process and requires no major renovation work. Situations, where direct contact of the wall with the ground is involved, the contact layer of brick is removed and uses the lining of plastic before putting back the blocks.
- Ventilation
Rainwater is the most common villain for condensation dampening. The rain pellets penetrate easily through the joint structures of a wall, windows, and ceiling. Such a case requires a sound ventilation system.
Your bathroom rear to the kitchen and your ceiling laid under an overhead water tank are going to be more affected in this case. The ventilation system will dry off and remove excess moisture shearing through the walls.
- Carebrick
Carebricks or hydrofuge is a relatively newer form of solution for wet walls. Holes are drilled initially at the base of your wall at a considerable height of 30 cms from the ground. Later, a ceramic tube is slid over a sleeve and gets fixed inside the holes. Enhancing the evaporation of any moisture underlying the base, this ventilates the whole system very well. This method is relatively costly, and people who don’t like to display holes in their house can camouflage them with their favorite color.
For better results, hydrofuges are to be installed all-around your house and not only on the damp spot.
- Waterproof Wall protection
Requiring a lot of renovation work, it is suggested only for a wholly damp place. The wall layer affected by dampening is rebuilt here, along with waterproof additives.
A water-retaining mortar is applied thoroughly throughout the area before putting back new bricks. This process wallops rising dampness that occurs from the ground and secures the health of your walls.
Leakages in the connecting plumping lines and steam outlets also need to be checked and assured by an expert.
- Moisture resistance painting
It is highly advised to use moisture resistance high graded paint for your residences when dampening is not bothering. Preventing your building from external climatic conditions is very important, and these paints aid the cause perfectly. The preventive application endures the life of your walls, even though it’s a little expensive.
