Air Conditioning: How Do Ductless Mini Splits Work?

Admin

Air 2

Many homes in Glendale use traditional ducted air conditioning systems. The emphasis on ductwork makes sense because traditional systems are reliable.

They use tried and tested methods to transfer warm and cold air. However, ductless air conditioners are gaining traction in many regions because of their efficiency, convenience, and relative simplicity.

But are mini-splits the correct choice for your home? How do mini splits work? Unfortunately, you can’t answer that question if you don’t know how a mini-split air conditioner works.

How Do Ductless Mini Splits Work?

Ductless air conditioners, also called mini-splits, consist of an indoor unit and an outdoor unit. The indoor units have evaporator coils that absorb the warm air in a room.

The indoor units use a refrigerant to strip the warm air of heat, ejecting the heat via the outdoor unit. This process ends when the indoor unit blows cool air back into the room.

As you can see, mini-splits achieve the same objective as traditional HVACs. But they don’t use ductwork.

Air

Where Can You Install Ductless Mini Splits?

Ductless air conditioners are compatible with both commercial and residential settings. As a result, they have become quite commonplace in garages, attics, and finished basements. HVAC suppliers target garages because you can’t install ductwork in a garage, not legally.

Basements also attract mini-splits because of their vulnerability to extreme temperatures. While some are cold, others are too hot. With older homes, ductless HVACs are the only sensible choice for homeowners that want to add habitable living spaces to pre-existing structures.

Master bedrooms do not sound like an obvious target for these products. However, it would help to remember that these rooms are usually far from the central heating and cooling unit. For that reason, they are rarely as cool or warm as their inhabitants would like.

Rather than extending the ductwork to encompass the master bedroom, installing a few ductless indoor units is so much easier.

What Else Does A Ductless Mini Split Do?

They help control the temperature. For example, the Ductless mini-splits uses the evaporator coils to cool and warm the air. But you probably don’t realize that those coils reduce humidity by collecting and draining condensate from your home.

Additionally, mini-splits have filtration functions. They use filters to capture particulates that would typically pollute your air. Rather than moving dirty air in and out of the home, they scrub the air, a feature that consumers with allergies tend to appreciate.

What Makes Ductless Mini Split Systems So Beneficial?

Now that you know how ductless micro splits function, you probably want to know why you should buy one. These systems provide a number of benefits, including:

Efficiency

Ductless systems are more efficient than their traditional counterparts. Systems that rely on ducts are troublesome because they are prone to leaks. They will permit warm air from outside to invade your home on a hot day.

If the exterior conditions are cold, the reverse will happen. Your central heating system will respond by working even harder to keep the house warm. Ductless systems do not transport air between the interior and exterior. Therefore, they are not prone to air leaks. It makes their operations more efficient which, in turn, allows them to reduce your utility bill.

Air 1

Installation

Ductless mini-splits are so much easier to install. Unfortunately, ducted systems are a nuisance. Contractors have to disrupt your home’s routine to add ducts across the various rooms in the house.

Installation can easily take weeks, depending on the Size of your property. Ductless systems are not as intrusive because you can install individual indoor units one room at a time. This process can take a day or less to complete.

Air Quality

Traditional ducted systems funnel air from the exterior. They allow pollutants from outside to enter your house, including pollen and bacteria. They will continue to circulate those pollutants throughout your home. Ductless systems use filters to strip the contaminants from the air.

Flexibility

Traditional ducted systems perform their heating and cooling functions evenly. That is to say; if you raise the temperature in a particular room, you will increase the temperature in every other room. If you lower the temperature in one corner of the building, the temperature across the entire building will drop.

Ductless systems are better because you can create heating and cooling zones. For instance, you can raise the temperature in an office while lowering it in the gym. In addition, because each room has an indoor unit, you can adjust the temperature in a given area without affecting other places within the same building.

Size

It wouldn’t make sense to install a ducted system in a small apartment, garage, or basement. However, these systems are more cost-effective when added to large structures.

Otherwise, they are too expensive to install in small rooms. Ductless mini-splits do not have this problem. They are compatible with spaces of any size.

Visibility

Because ductless mini splits are small, you can hide them. They do not retain so much space as ducted systems.

Heat Pumps

Ductless systems are supposed to keep your home cool. But if you want, you can pair them with heat pumps to warm your house as well. Add a Glendale Air Conditioning professional to your speed dial, especially if you intend to renovate your home. Traditional HVACs are still the dominant force on the market. However, mini-splits are slowly gaining traction, especially within residential settings.

Enquire from your contractor about the possibility of introducing mini-splits; let them investigate your property. They will determine the feasibility of using ductless HVACs in comparison to ducted systems. Mini-splits are a sensible option if you don’t have ductwork. The reason is that they are flexible and cost-effective.

Air Conditioning: How Do Ductless Mini Splits Work? was last modified: by