Water taps play a vital role in our home. They dispense water that we need in our everyday activities. Keeping them in good working condition is essential. Sometime, things will go wrong with water taps. Problems such as leaks and noise are the most common issue. There are times when you need to replace them to solve the problem completely. Below are some common water tap problems and some possible solution.
It is the most common problem in plumbing and the easiest to repair, given that the issue is only minor. Leaving a dripping faucet will cost you money since it will affect your water bill. One faulty faucet with a steady grip can cost around $20 in a short time. So if you have multiple dripping faucets in your house, you can basically figure out how much of your money is going down the drain. A dripping tap is usually caused by malfunctioning washer or faucet seat. When the water enters your home, there is that seal that is holding back the incoming water when the water tap is in the OFF position.
That seal is made up of the washer pressed against the faucet seat. So if one of them is not properly working, a little water can seep through resulting in a dripping faucet. To fix this, there is a need to replace the washer or fix the seat. In order to do that, make sure water supply is turned off. Disassemble the faucet and replace what needs to replaced. Note that faucet deteriorates with age. If your tap is leaking and it is very old, consider replacing it sooner.
There are instances when water taps whistle, chatter or scream when you turn it on and/or off. This problem is caused by various factors. It may be because your water pipes are too small to allow the water to pass through properly, especially when your house is newly built. Similar to old houses, there can be a restriction in water flow due to the formation of scale, thus resulting in noisy faucets.
Either way, you will need to have your pipes replaced. This is not going to be a quick fix, so you are going to need the help from professional plumber in Cherrybrook. There are also cases when the noisy faucet is caused by the washer being in the wrong size or not tight enough. Tightening the washer or replacing it should eliminate the noise. But if not, it may be the washer seat being partially closed with residue resulting in restricted water flow that causes the whistling. Given that this is the case, all you have to do is clean the seat. If the faucet is squealing when you turn the handle, it means that the metal threads are binding against the thread of the faucet. This requires lubrication on both threads. You can use petroleum jelly. But if you can see that the threads have worn out, it may mean that you need to install a new faucet completely.
Some of water taps problems require only an easy fix. That is if you have knowledge of what is causing the problem. If you are a DIY enthusiast and you know how work around simple plumbing issue such as replacing water taps, you may do the job. However, if you don’t have an idea about the issue, then you must call for a plumbing service. Sometimes, what you think is an easy fix can actually be a complicated job. Calling professional plumbers to look at your problem is a good option to solve the problem quickly. You should not attempt to fix it on your own if you are not sure as it can result in a more complicated plumbing issue. The complicated the problem, the more it will cost you. It’s always a bright idea to call a plumber to solve the problem for you even if you want to do it on your own. Most plumbers are happy to replace water taps and at the same time, walk you through the process. They can give you guidelines and show you the tools needed to get the job done correctly. Remember not to neglect plumbing issues that you know need repair. Ignoring them will only cost you more.